Pioneer DEH-P3000IB, Operation Manual

Page: 36 / 111

Disconnecting a cellular phone
1 Use MULTI-CONTROL to select
DISCONNECT PHONE in the function menu.
Device name of the connected phone appears
in the display.
2 Press MULTI-CONTROL to disconnect a
cellular phone from this unit.
After disconnection is completed,
DISCONNECTED
is displayed.
Registering a connected
cellular phone
1 Use MULTI-CONTROL to select
SET PHONE in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select a regis-
tration assignment.
P1
(user phone 1)
—
P2
(user phone 2)
—
P3
(user phone 3)
—
G1
(guest phone 1)
—
G2
(guest phone 2)
#
You can also perform the same operations by
pushing MULTI-CONTROL up or down.
#
As you select each assignment, you can see
whether or not a phone is already registered. If
the assignment is empty,
NO DATA
is displayed.
If the assignment is already taken, the device
name appears. To replace an assignment with a
new phone, first delete the current assignment.
For more detailed instructions, see
Deleting a re-
gistered phone on this page.
4 Press MULTI-CONTROL to register the
currently connected phone.
When registration is completed,
REG COMPLETED is displayed.
#
If the registration fails, REG ERROR is dis-
played. In this case, return to step 1 and try
again.
Deleting a registered phone
1 Use MULTI-CONTROL to select
DELETE PHONE in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select a regis-
tration assignment.
P1
(user phone 1)
—
P2
(user phone 2)
—
P3
(user phone 3)
—
G1 (guest phone 1)
—
G2
(guest phone 2)
#
You can also perform the same operations by
pushing
MULTI-CONTROL
up or down.
#
If the assignment is empty,
NO DATA
is dis-
played and operation is not possible.
4 Press MULTI-CONTROL to show the con-
firmation display.
5 Turn MULTI-CONTROL to select
DELETE OK? : YES.
The phone being deleted is now on standby.
#
To cancel, select
DELETE OK? : NO
.
6 Press MULTI-CONTROL to delete the
phone.
After the phone is deleted, DELETED is dis-
played.
Connecting to a registered
cellular phone
Connecting to a registered phone
manually
1 Use MULTI-CONTROL to select
CONNECT PHONE in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select a regis-
tration assignment.
P1
(user phone 1)
—
P2 (user phone 2)
—
P3
(user phone 3)
—
G1
(guest phone 1)
—
G2
(guest phone 2)
Available accessories
En
36
Section
06