!
Charging the portable audio player using
car
’
s DC power source while connecting it to
AUX input may generate noise. In this case,
stop charging.
!
External unit refers to a Pioneer product (such
as ones available in the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can be controlled with this unit. When
two external units are connected, the external
unit is automatically allocated to external unit
1 or external unit 2 by this unit.
!
When this unit
’
s blue/white lead is connected
to the vehicle
’
s auto-antenna relay control
terminal, the vehicle
’
s antenna extends when
this unit
’
s source is turned on. To retract the
antenna, turn the source off.
Adjusting the volume
%
Turn MULTI-CONTROL to adjust the
sound level.
Tuner
Basic Operations
%
Select a band
Press
BAND
.
#
Band can be selected from among
FM1
,
FM2
,
FM3
or
AM
.
%
Manual tuning (step by step)
Push
MULTI-CONTROL
left or right.
%
Seek tuning
Push and hold
MULTI-CONTROL
left or right
for about one second and release.
#
You can cancel seek tuning by pushing
MULTI-CONTROL
left or right.
#
If you push and hold
MULTI-CONTROL
left or
right, you can skip stations. Seek tuning starts as
soon as you release
MULTI-CONTROL
.
Note
Listening AM radio while connecting iPod to this
unit may generate noise. In this case, disconnect
iPod from this unit and noise is disappeared.
Storing and recalling broadcast
frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
!
Six stations for each band can be stored in
memory.
1
Press LIST.
Preset screen is displayed.
2
Use MULTI-CONTROL to store the se-
lected frequency in memory.
Turn to change the preset number. Press and
hold to store.
#
You can also store the frequency in memory
by pushing and holding
MULTI-CONTROL
right.
3
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
Operating this unit
En
12
Section
02
