Pioneer DEH-600BT, Operation Manual

Page: 34 / 51

#
This function can be performed even while
talking on the phone. In this case, press
MULTI-CONTROL
to switch to
ECHO CANCEL
.
Switching the ring tone
1 Display the function menu.
Refer to Introduction to advanced operations
on page 31.
2 Use MULTI-CONTROL to select
RING TONE in the function menu.
3 Push MULTI-CONTROL left or right to
select the desired setting.
OFF
(off)
—
1
—
2
—
3
Making a call by entering
phone number
Important
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
1 Display the function menu.
Refer to Introduction to advanced operations
on page 31.
2 Use MULTI-CONTROL to select
NUMBER DIAL.
3 Push MULTI-CONTROL up or down to
select a number.
4 Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
#
Up to 24 digits can be entered.
5 When you finish entering the number,
press MULTI-CONTROL.
Call confirmation appears.
6 Press MULTI-CONTROL again to make a
call.
7 To end the call, press .
Clearing memory
1 Display the function menu.
Refer to Introduction to advanced operations
on page 31.
2 Use MULTI-CONTROL to select
CLR MEMO.
3 Push MULTI-CONTROL up or down to
select an item.
PH BOOK
(phone book)
—
ALL
(delete all
memory)
—
PRESET (preset phone numbers)
—
RECENT (call history)
#
If you want to clear the entire Phone Book,
call history list and preset phone number, select
ALL .
4 Push MULTI-CONTROL right to deter-
mine the item that you want to delete
from this unit.
CLEAR MEMORY YES
is displayed. Clearing
memory is now on standby.
#
If you do not want to clear the memory that
you have selected, push
MULTI-CONTROL
left.
The display reverts to normal.
5 Press MULTI-CONTROL to clear the
memory.
CLEARED
is displayed and data on the se-
lected item is cleared from this unit
’
s memory.
Adding the prefix for
international calls
You can add the international call prefix
“
+
”
to
all calls.
1 Display the function menu.
Refer to Introduction to advanced operations
on page 31.
2 Use MULTI-CONTROL to select ADD+.
3 Press MULTI-CONTROL to add the prefix
to all calls.
#
To turn off, press
MULTI-CONTROL
again.
Operating this unit
En
34
Section
02