Pioneer DEH-4600BT, Operation Manual

Page: 23 / 36

Initial menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press and hold SRC/OFF until the main
menu appears in the display.
3 Turn M.C. to change the menu option
and press to select INITIAL.
4 Turn M.C. to select the initial menu
function.
Once selected, the following initial menu func-
tions can be adjusted.
FM STEP (FM tuning step)
1
Press M.C. to select the FM tuning step.
100 (100 kHz)
—
50 (50 kHz)
SP-P/O MODE (rear output and preout setting)
The rear speaker leads output and the RCA output of
this unit can be used to connect a full-range speaker
or subwoofer. Select a suitable option for your con-
nection.
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to select the desired setting.
!
REAR/SUB.W
–
Select when there is a full-
range speaker connected to the rear speaker
leads output and there is a subwoofer con-
nected to the RCA output.
!
SUB.W/SUB.W
–
Select when there is a sub-
woofer connected directly to the rear speaker
leads output without any auxiliary amp and
there is a subwoofer connected to the RCA
output.
!
REAR/REAR
–
Select when there is a full-
range speaker connected to the rear speaker
leads output and the RCA output.
If there is a full-range speaker connected to
the rear speaker leads output and the RCA
output is not used, you may select either
REAR/SUB.W
or
REAR/REAR
.
S/W UPDATE
(updating the software)
This function is used to update this unit with the lat-
est Bluetooth software. For about Bluetooth software
and updating, refer to our website.
!
Never turn the unit off while the Bluetooth soft-
ware is being updated.
1
Press M.C. to start updating.
Follow the on-screen instructions to finish updat-
ing the Bluetooth software.
System menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press and hold SRC/OFF until the main
menu appears in the display.
3 Turn M.C. to change the menu option
and press to select SYSTEM.
4 Turn M.C. to select the system menu
function.
For details, refer to System menu on page
19.
Using an AUX source
1 Insert the stereo mini plug into the
AUX input jack.
2 Press SRC/OFF to select AUX as the
source.
Note
AUX cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to
AUX
(auxiliary input) on page 20.
Switching the display
Selecting the desired text information
1
Press DISP to cycle between the following:
!
Source name
!
Source name and clock
En
23
Section
02
Using
this
unit
Using this unit