Pioneer DEH-4600BT, Operation Manual

Page: 18 / 36

Pausing playback
1
Press 4 / PAUSE to pause or resume.
Enhancing compressed audio and restoring rich
sound (sound retriever)
Only for DEH-4600BT
1
Press
3
/
S.Rtrv
to cycle between:
1
—
2
—
OFF (off)
1
is effective for low compression rates, and
2
is
effective for high compression rates.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
PLAY
(play)
1
Press
M.C.
to start playback.
STOP
(stop)
1
Press M.C. to stop the playback.
S.RTRV (sound retriever)
1
Press M.C. to select the desired setting.
For details, refer to Enhancing compressed audio
and restoring rich sound (sound retriever) on page
18.
Audio adjustments
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
Once selected, the following audio functions
can be adjusted.
!
FADER is not available when
SUB.W/SUB.W is selected in
SP-P/O MODE
. For details, refer to
SP-P/O MODE
(rear output and preout set-
ting) on page 23.
!
SUB.W and SUB.W CTRL are not available
when
REAR/REAR
is selected in
SP-P/O MODE . For details, refer to
SP-P/O MODE (rear output and preout set-
ting) on page 23.
!
SUB.W CTRL is not available when SUB.W
is selected in OFF . For details, refer to
SUB.W (subwoofer on/off setting) on page
19.
!
SLA is not available when FM is selected as
the source.
FADER (fader adjustment)
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to adjust the front/rear speaker bal-
ance.
BALANCE (balance adjustment)
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to adjust the left/right speaker balance.
EQ SETTING
(equalizer recall)
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to select the equalizer.
POWERFUL
—
NATURAL
—
VOCAL
—
CUSTOM1
—
CUSTOM2
—
FLAT
—
SUPER BASS
The equalizer band and equalizer level can be cus-
tomized when
CUSTOM1 or CUSTOM2 is se-
lected.
If selecting
CUSTOM1 or CUSTOM2 , complete
the procedures outlined below. If selecting other
options, press
M.C.
to return to the previous dis-
play.
!
CUSTOM1
can be set separately for each
source. However, each of the below combina-
tions are set to the same setting automati-
cally.
!
USB , iPod and APP (iPhone)
!
BT AUDIO
and
APP
(smartphone)
!
CUSTOM2 is a shared setting used in com-
mon for all sources.
3
Press M.C. to display the setting mode.
4
Press
M.C.
to cycle between the following:
Equalizer band
—
Equalizer level
5
Turn M.C. to select the desired setting.
Equalizer band: 80HZ
—
250HZ
—
800HZ
—
2.5KHZ
—
8KHZ
Equalizer level: +6 to
–
6
En
18
Section
02
Using this unit