Pioneer DEH-4490BT, Owner'S Manual

Page: 10 / 24

2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
PLAY (play)
1
Press M.C. to start playback.
STOP (stop)
1
Press
M.C.
to stop the playback.
PAUSE (pause)
1
Press
M.C.
to turn pause on.
Phone menu operation
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this
operation.
1 Press to display the phone menu.
2 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
MISSED
(missed call history)
DIALLED (dialed call history)
RECEIVED (received call history)
1
Press M.C. to display the phone number list.
2
Turn
M.C.
to select a name or phone number.
3
Press M.C. to make a call.
4
When you find a phone number that you want
to store in memory, press and hold one of the
preset tuning buttons (
1 to 6 ).
!
Press one of preset buttons
1
to
6
to recall
the desired preset number.
PHONE BOOK (phone book)
!
The phone book in your cellular phone will be
transferred automatically when the phone is
connected to this unit.
!
Depending on the cellular phone, the phone
book may not be transferred automatically. In
this case, operate your cellular phone to trans-
fer the phone book. The visibility of this unit
should be on. Refer to
VISIBLE (setting the visi-
bility of this unit) on the previous page.
1
Press M.C. to display SEARCH (alphabetical
list).
2
Turn
M.C.
to select the first letter of the name
you are looking for.
!
Press and hold M.C. to select the desired
character type.
3
Press M.C. to display a registered name list.
4
Turn
M.C.
to select the name you are looking
for.
5
Press M.C. to display the phone number list.
6
Turn M.C. to select a phone number you want
to call.
!
When you find a phone number that you
want to store in memory, press and hold
one of the preset tuning buttons (
1 to 6 ).
!
Press one of preset buttons 1 to 6 to recall
the desired preset number.
7
Press
M.C.
to make a call.
PRESET1-6 (preset phone numbers)
1
Press M.C. to display the setting mode.
2
Use M.C. to select the desired preset number.
Turn to change the menu option. Press to se-
lect.
!
You can also press one of the preset num-
ber buttons
1
to
6
to select a number.
3
Press M.C. to make a call.
PHONE FUNC (phone function)
You can set A. ANSR and R.TONE from this menu.
For details, refer to Function and operation on this
page.
Function and operation
1 Display PHONE FUNC.
Refer to
PHONE FUNC
(phone function) on this
page.
2 Press M.C. to display the function menu.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
A. ANSR (automatic answering)
1
Press M.C. to turn automatic answering on or
off.
R.TONE (ring tone select)
1
Press M.C. to turn the ring tone on or off.
PB INVT
(phone book name view)
1
Press M.C. to switch between the lists of
names.
Audio adjustments
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.
FAD/BAL (fader/balance adjustment)
1
Press M.C. to display the setting mode.
2
Press
M.C.
to cycle between fader (front/rear)
and balance (left/right).
3
Turn M.C. to adjust speaker balance.
!
When the rear output and RCA output setting
are
SW , you cannot adjust front/rear speaker
balance. Refer to
REAR-SP
(rear output setting)
on the next page. Refer to PREOUT (preout set-
ting) on the next page.
PRESET EQ (equalizer recall)
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the equalizer.
DYNAMIC
—
VOCAL
—
NATURAL
—
CUSTOM
—
FLAT
—
POWERFUL
3
Press M.C. to confirm the selection.
TONE CTRL (equalizer adjustment)
!
Adjusted equalizer curve settings are stored in
CUSTOM .
1
Press M.C. to display the setting mode.
2
Press
M.C.
to select
BASS
(bass)/
MID
(mid)/
TREBLE (treble).
3
Turn M.C. to adjust the level.
Adjustment range: +6 to
–
6
LOUD (loudness)
Loudness compensates for deficiencies in the low-
frequency and high-frequency ranges at low vol-
ume.
1
Press M.C. to select the desired setting.
OFF
(off)
—
LOW
(low)
—
HI
(high)
SUB.W (subwoofer on/off setting)
This unit is equipped with a subwoofer output
which can be turned on or off.
1
Press
M.C.
to select the desired setting.
NOR (normal phase)
—
REV (reverse phase)
—
OFF (subwoofer off)
SUB.W CTRL (subwoofer adjustment)
Operating this unit
10
Section
Operating this unit
En
02