Playing a CD
1 2
3
1
RPT indicator
Shows when repeat play is turned on.
2
Track number indicator
Shows the track currently playing.
3
Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1 Insert a CD into the CD loading slot.
Playback will automatically start.
#
Be sure to turn up the label side of a disc.
#
After a CD has been inserted, press
SOURCE
to select the built-in CD player.
#
You can eject a CD by pressing
EJECT
.
2 Use VOLUME to adjust the sound level.
3To perform fast forward or reverse,
press and hold
c
or
d
.
4 To skip back or forward to another
track, press
c
or
d
.
Pressing
d
skips to the start of the next track.
Pressing
c
once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!
The built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
!
Do not insert anything other than a CD into
the CD loading slot.
!
If an error message such as
ERROR-11
is dis-
played, refer to
Repeating play
Repeat play lets you hear the same track over
again.
%
Press 5 repeatedly to turn repeat play
on or off.
When repeat play is on,
RPT
appears in the
display.
#
If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
%
Press PAUSE repeatedly to turn pause
on or off.
When pause is on,
PAUSE
appears in the dis-
play.
Built-in CD Player
En
11
English
Section
06
