Black plate (6,1)
4
To perform seek tuning, press and hold
c
or
d
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by briefly pressing
c
or
d
.
#
If you press and hold
c
or
d
you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Storing and recalling broadcast
frequencies
%
When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
Memorized radio station frequency can be re-
called by pressing the preset tuning button.
#
Up to 18 FM stations, six for each of the three
FM bands, and six AM stations can be stored in
memory.
#
You can also use
a
and
b
to recall radio sta-
tion frequencies assigned to preset tuning but-
tons
1
to
6
.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1
Press FUNCTION to select LOCAL.
2
Press
a
or
b
to turn local seek tuning
on or off.
3
Press
c
or
d
to set the sensitivity.
FM:
LOCAL 1
—
LOCAL 2
—
LOCAL 3
—
LOCAL 4
AM:
LOCAL 1
—
LOCAL 2
The
LOCAL 4
setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons
1
to
6
.
Once stored you can tune in to those frequen-
cies with the touch of button.
!
Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using buttons
1
to
6
.
1
Press FUNCTION to select BSM.
2
Press
a
to turn BSM on.
Six strongest broadcast frequencies will be
stored in the order of their signal strength.
#
To cancel the storage process, press
b
.
Built-in Player
Playing a disc
1
Insert a CD into the CD loading slot.
Playback will automatically start.
#
Be sure to turn up the label side of a disc.
#
After a CD has been inserted, press
SOURCE
to select the built-in CD player.
#
You can eject a CD by pressing
EJECT
.
2
To perform fast forward or reverse,
press and hold
c
or
d
.
3
To skip back or forward to another
track, press
c
or
d
.
Notes
!
Read the precautions with discs and player on
page 10.
!
If an error message such as
ERROR-11
is dis-
played, refer to
Error messages
on page 10.
Repeating play
Repeat play lets you hear the same track over
again.
1
Press FUNCTION to select RPT.
2
Press
c
or
d
to select the repeat range.
DSC
–
Repeat all tracks
<CRD4146-A/N>6
Operating this unit
En
6
Section
02
