Listening to the radio
1
2
4
5
3
1
Band indicator
Shows which band the radio is tuned to, AM
or FM.
2
LOC indicator
Shows when local seek tuning is on.
3
Stereo (
5
) indicator
Shows that the frequency selected is being
broadcast in stereo.
4
Frequency indicator
Shows to which frequency the tuner is
tuned.
5
Preset number indicator
Shows which preset has been selected.
1 Press SOURCE to select the tuner.
2 Use VOLUME to adjust the sound level.
3 Press BAND to select a band.
Press
BAND
until the desired band is dis-
played,
F1
,
F2
,
F3
for FM or
AM
.
4 To perform manual tuning, briefly press
c
or
d
.
5 To perform seek tuning, press and hold
c
or
d
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by briefly pressing
either
c
or
d
.
#
If you press and hold
c
or
d
you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Storing and recalling
broadcast frequencies
If you press any of the preset tuning buttons
1
6
you can easily store up to six broadcast
frequencies for later recall with the touch of a
button.
!
Up to 18 FM stations, six for each of the
three FM bands, and six AM stations can
be stored in memory.
%
When you find a frequency that you
want to store in memory press one of pre-
set tuning buttons 1
6 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
%
Press LOCAL/BSM repeatedly to turn
local seek tuning on or off.
When local seek tuning is on,
LOC
appears in
the display.
Tuner
En
8
Section
04
