Pioneer DEH-140UB, Owner'S Manual

Page: 7 / 44

Audio adjustments
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.
FAD/BAL (fader/balance adjustment)
1
Press M.C. to display the setting mode.
2
Press M.C. to cycle between fader (front/rear)
and balance (left/right).
3
Turn M.C. to adjust speaker balance.
PRESET EQ (equalizer recall)
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to select the equalizer.
DYNAMIC
—
VOCAL
—
NATURAL
—
CUSTOM
—
FLAT
—
POWERFUL
3
Press M.C. to confirm the selection.
!
You can also switch the equalizer by pressing
(EQ) repeatedly.
TONE CTRL (equalizer adjustment)
!
Adjusted equalizer curve settings are stored in
CUSTOM .
1
Press M.C. to display the setting mode.
2
Press M.C. to select BASS (bass)/ MID (mid)/
TREBLE
(treble).
3
Turn M.C. to adjust the level.
Adjustment range: +6 to
–
6
LOUD (loudness)
Loudness compensates for deficiencies in the low-
frequency and high-frequency ranges at low vol-
ume.
1
Press M.C. to select the desired setting.
OFF (off)
—
LOW (low)
—
HI (high)
SLA (source level adjustment)
SLA (Source level adjustment) lets you adjust the
volume level of each source to prevent radical
changes in volume when switching between sour-
ces.
!
Settings are based on the FM volume level,
which remains unchanged.
!
The AM volume level can also be adjusted with
this function.
!
When selecting FM as the source, you cannot
switch to
SLA .
1
Press M.C. to display the setting mode.
2
Turn M.C. to adjust the source volume.
Adjustment range: +4 to
–
4
3
Press
M.C.
to confirm the selection.
Initial settings
1 Press and hold SRC/OFF until the unit
turns off.
2 Press M.C. and hold until function name
appears in the display.
3 Turn M.C. to select the initial setting.
After selecting, perform the following proce-
dures to set the initial setting.
CLOCK SET (setting the clock)
1
Press M.C. to display the setting mode.
2
Press M.C. to select the segment of the clock
display you wish to set.
Hour
—
Minute
3
Turn M.C. to adjust the clock.
AUX (auxiliary input)
Activate this setting when using an auxiliary de-
vice connected to this unit.
1
Press M.C. to turn AUX on or off.
USB PNP (plug and play)
This setting allows you to switch your source to
USB automatically.
1
Press
M.C.
to turn the plug and play function
on or off.
ON
–
When USB storage device is connected,
depending on the type of device, the source is
automatically switched to
USB when you turn
on the engine. If you disconnect your USB stor-
age device, this unit
’
s source is turned off.
OFF
–
When USB storage device is connected,
the source is not switched to USB automati-
cally. Please change the source to USB man-
ually.
DEMO (demo display setting)
1
Press
M.C.
to turn the demo display on or off.
SCROLL (scroll mode setting)
When ever scroll is set to ON , recorded text infor-
mation scrolls continuously in the display. Set to
OFF
if you prefer the information to scroll just
once.
1
Press M.C. to turn the ever scroll on or off.
Using an AUX source
1 Insert the stereo mini plug into the AUX
input jack.
2 Press SRC/OFF to select AUX as the
source.
Note
AUX cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to
AUX
(auxiliary input) on this page.
Turning the clock display on
or off
%
Press to turn the clock display on or
off.
#
The clock display disappears temporarily when
you perform other operations, but the clock display
appears again after 25 seconds.
English
Operating this unit
7
Section
Operating this unit
En
02