5
En
English
2 Click [CONFIG] in the top left of the computer’s
screen.
The [
Settings
] screen appears.
Settings should be selected on the [
Sound Setup
] tab in the following
order:
1
[
Inputs
]: Select [
NONE
].
2
[
Sound card
]: Select [
4-OUT CARD
] and [
Pioneer DDJ-WeGO
].
3
[
Outputs
]: Select [
HEADPHONES
] and
[
Master: Chan 1&2/Headphones: Chan 3&4
].
3 Click [Apply], then click [OK].
Basic Operation
B
A
B
C
C
Loading tracks and playing them (
r
A)
1 Turn the rotary selector while pressing the [SHIFT]
button to select a folder or item.
!
When a folder or item with the [+] mark is selected and the rotary
selector is pressed while pressing the [
SHIFT
] button, that folder or
item is opened or closed.
2 Release the [SHIFT] button then turn the rotary
selector to select the track.
3 Press the [LOAD] button to load the selected track
onto the deck.
4 Press the [
f
] button to play the track.
!
When this button is pressed again during playback, playback
pauses.
Using the mixer functions (
r
B)
!
Adjust the volume of the powered speakers, etc., connected to the
[
MASTER OUT
] terminals to an appropriate level. Note that if the
volume is set too high, the output sound could be very loud.
1 Operate the channel faders to adjust the audio level
output from the respective decks.
2 Operate the crossfader to switch the deck whose
sound is output from the speakers.
—
Left edge: Sound is output from deck [
A
] or [
C
].
—
Center: The sound of all the decks is mixed and output.
—
Right edge: Sound is output from deck [
B
] or [
D
].
!
The curve characteristics can be switched using the crossfader
curve setting button on the [
MIXER
] panel at the center of the com-
puter’s screen.
—
[
]: Select this when you do not want to use the crossfader.
—
[
]: Set here for a curve that rises gradually.
—
[
]: Sets an abruptly rising curve.
3 Turn the [MASTER VOL] control to adjust the audio
level of the speakers.
Monitoring sound with headphones (
r
C)
1 Connect headphones to the [PHONES] terminal.
2 Press the [CUE ] button for the deck you want to
monitor.
3 Turn the [HEADPHONES MIX] control.
!
Turn counterclockwise: The volume of the deck whose [
CUE
] but-
ton is pressed increases relatively.
!
Turn clockwise: The [
MASTER OUT
] volume increases relatively.
4 Turn the [HEADPHONES VOL] control.
!
The sound of the deck whose [
CUE
] button is pressed is output
from the headphones.
!
When the [
CUE
] button is pressed again, monitoring is canceled.
Quitting the system
1 Quit VIRTUAL DJ LE.
2 Slide this unit’s [ON/OFF] switch to the [OFF] position.
3 Disconnect the USB cable from your computer.