Pioneer DDJ-T1, Service Manual

Page: 42 / 135

42
DDJ-T1
1 2 3 4
A
B
C
D
E
F
1 2 3 4
1
6
7
6
2
1
4
[1] Chassis Section
[1-1] Volumes and knobs
(1) Remove the two dial knobs S.
(2) Remove the 10 rotary knobs L (Gray).
(3) Remove the 12 rotary knobs L (Black).
(4) Remove the one dial knob.
(5) Remove the seven rotary knobs S (Black).
(6) Remove the two slide knobs (Metal).
(7) Remove the five silider knobs 2,
five slider knobs 1, five slider knob stoppers.
(See below.)
1
Find the side on which the line reaches
the bottom.
4
Remove the slider knob 1.
3
Remove the slider knob 2.
2
Insert a pair of tweezers etc. beneath
the line then push the slider knob 2
upward. To protect the panel from being
scratched, use protective material.
• Disassembly of the slider knob
The reference of the direction
The new slider knob adopted by this product is designed so that it is not pulled out easily.
Therefore, the method for removing the slider knob is different from the conventional method; it can only be pulled out after
slider knob 2 is removed.
Side on which
the line reaches the bottom
Protective material Tweezers
Slider knob 2
Slider knob 1
Slider knob 2
×
5
3
×
12
2
×
5
7
×
4
5
×
7
5
Remove the slider knob stopper.
Slider knob stopper
Disassembly
Stopper
(right direction)
Stopper
(front direction)
*: During reassembly, fully push
down Slider knob 2 until it is
dented into Slider knob 1.