Pioneer CDX-PD6 Service Manual Download Page 56

Page: 56 / 64

CDX-PD6

How to remove the Tray Assy

1. Apply about 6V current to the Cam gear motor until

all holes match at the position (A) (elevation OK posi-

tion).

2. Hook the three springs B temporarily as shown in Fig.

5. While pushing the Tray holder lock arms (right and

left) in the direction (C), remove the Tray holder.

3. Lift up the Tray assy to remove it.

* Be careful not to remove the Tray hooks from the Tray

assy.

How to remove the Carriage Mech Assy

1. Insert a short pin into the flexible PCB of the Pickup

unit.

2. While opening the resin hooks, remove the cover

from the Servo unit.

3. Disconnect the flexible PCBs from the connectors

CN101 and CN301.

4. Remove the Tray holder and the Tray assy. (See

above)

5. Rotate the Cam gear motor until the positions of all

holes (E) match, then stop the motor.

(The Carriage Mech assy will stop as shown in the

Fig.7.)

* When the positions of all holes match, they will be

completely covered by the Carriage mech assy.

* To rotate the Cam Gear motor, see "How to remove

the Tray assy".

6. Unhook the spring A.

7. Remove the flexible holder B (while opening the

hooks).

8. Remove the flexible PCB (C) from the motor. (The

flexible PCB (C) has been stuck on the motor with

double-sided adhesive tape.)

9. Loosen the fixing screw and remove the flexible

holder.

ELV motor

Cam gear motor

Approximately DC 6V

Tray holder

Tray holder lock arm

Tray holder
lock arm

Tray
hooks

Tray Assy

Cover

CN101

CN301

Match the hole positions

Flexible
holder

Fig.5

Fig. 6

Fig. 7

Short pin

Tray
hooks

Summary of Contents for CDX-PD6

































































Search results

Summary of Contents for CDX-PD6

Reviews:

Related manuals for CDX-PD6

Brands by name

Popular brands

Pioneer CDX-PD6, Service Manual

Search results

Summary of Contents for CDX-PD6

Reviews:

Related manuals for CDX-PD6

Brands by name

Popular brands