Pioneer CDX-PD6, Service Manual

Page: 55 / 64

55
CDX-PD6
7.1.2 DISASSEMBLY
-
Removing the Extend Unit (Fig. 1)
1. Remove the three screws B, then remove the side
frame and holder.
2. Remove screw C, screw D and PCB from the con-
nector.
3. Straighten the three currently bent claws, then
remove the extend unit.
-
Removing the CD Mechanism Module (Fig. 2)
1. Remove the three screws A, then remove the
front frame.
2. Remove the three screws B and two screws C,
then remove the damper and holder.
3. Remove the two spring
A
s, spring
B
and spring
C
from the hook, then remove the CD mecha-
nism module.
-
Removing the Keyboard PCB (Fig. 3)
1. Remove screws A and B, then remove the switch
PCB.
2. Remove the four screws D, then remove the
guide.
3. Remove the three screws C, then remove the key-
board PCB.
– Precautions on Assembly –
Apply spring
C
(black) to the front
side hook.
Remaining springs
A
and
B
are to be
hung on the center hook.
– Precautions on Assembly (Fig. 4) –
When mounting the switch PCB,
lower the white lever so as to prevent
the switch arm from bending.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Holder
Holder
Holder
Damper
Front Frame
Damper
Damper
Damper
Holder
Holder
Grille
PCB
-
Removing the Grille Assy (Fig. 1)
1. Remove the two screws A and the connector,
then remove the grille assy.
-
Removing the upper case (not shown)
1. Remove the five screws, then remove the upper
case. Extend Unit
Side Frame
CD Mechanism Module
Switch PCB
Guide
Grille Unit
Keyboard PCB