4
En
<For Windows 2000>
• If the [
Digital Signature Not Found
] message appears
during installation, click on the [
Yes
] button to continue the
installation process.
5
When installation is completed, the [Installation is now
complete.] message will appear. Click on the [Finish] button
to complete the process.
[3] Connect CDJ-400 to computer
Using the USB cable, connect the CDJ-400 to your computer,
then set the CDJ-400’s power switch to ON.
When the CDJ-400 is first connected to a computer or when
the computer’s USB port is reconnected, the message
[
Installing device driver software
] may appear on the
computer monitor. In this case, simply wait until the message
[
Your devices are ready for use
] is displayed.
<For Windows XP>
• During the installation process, if the computer displays the
message [
Can Windows connect to Windows Update to
search for software?
] select [
No, not this time
], then click
on the [
Next
] button to continue the installation process.
• During installation, if the computer displays the message [
What
do you want the wizard to do?
] select [
Install the software
automatically (Recommended)
], then click the [
Next
] button
to continue installation.
• If the [
Hardware Installation
] message appears during
installation, click on [
Continue Anyway
] to continue the
installation process.
<For Windows 2000>
• If the [
Digital Signature Not Found
] message appears during
installation, click on the [
Yes
] button to continue the installation
process.
