Pioneer BDR-XU03T, Operating Instructions Manual

Page: 3 / 64

For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be
easily accessible.
IMPORTANT NOTICE
RECORD THE MODEL NUMBER AND SERIAL NUMBERS OF THIS EQUIPMENT BELOW.
THE NUMBERS ARE ON THE BOTTOM.
MODEL NO.
SERIAL NO.
KEEP THESE NUMBERS FOR FUTURE USE.
D1-4-2-6-2*_A1_En
BDR-XU03T
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.
D58-5-1-2a_A1_En
CAUTION
This product is a class 1 laser product classified
under the Safety of laser products, IEC
60825-1:2007, but this product contains a laser
diode higher than Class 1. To ensure continued
safety, do not remove any covers or attempt to
gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution label appears on your
unit.
D58-5-2-2b*_A1_En
CLASS 1 LASER PRODUCT
Location: Top of built-in drive
Location: Top of built-in drive and rear of
outer mounting case
ここを開くとクラス 3B の可視レーザ放射及び不可視レーザ
放 射 が 出 ま す。 ビ ー ム の 目 又 は 皮 膚 へ の 被 ば く は 危 険！
見たり触れたりしないこと。
BDR-XU03T_en.fm 3 ページ ２０１３年１０月７日 月曜日 午前１１時５分