Pioneer BDP-05FD - Elite Blu-Ray Disc Player, Service Manual

Page: 40 / 127

40
BDP-05FD
1 2 3 4
A
B
C
D
E
F
1 2 3 4
ATA/ATAPI DEBUG OSD
Press the ESC, DISP, then 3 keys, in that order, to display the 1st screen for ATA/ATAPI DEBUG OSD.
Then press the DIG/ANA key to switch screens.
• 1st screen (ATA/ATAPI DEBUG OSD-Command history [ALL])
The power-on duration and error logs that the writer manages are displayed.
To update the display, press the SEARCH key of the remote control unit for service while this screen is being displayed.
1
Packet commands from the host (10 Bytes from the beginning are
displayed.)
2
Error data for the corresponding packet commands in the Status
register
If the error bit is 0: OK
If the error bit is 1: Error code (Sense key, ASC, ASCQ)
3
This indicates the latest command log.
4
The first 9 command logs are listed, in descending order.
If the number of logs exceeds 9, the subsequent log will overwrite the
oldest (uppermost) log, and the same will follow as the logs are added.
1
Accumulated power-on duration
2
LD read power-on duration for the BD
3
LD read power-on duration for the DVD.
4
LD read power-on duration for the CD.
5
Serial No. of the PU
1
The beginning (1 byte) of the packet command that was failed is
indicated.
2
Error code (Sense key, ASC, ASCQ)
3
The command-specific information (4 bytes) that was acquired by the
Request Sense command is displayed.
4
This indicates the latest command log.
5
The first 9 command logs are listed, in descending order.
If the number of logs exceeds 9, the subsequent log will overwrite the
oldest (uppermost) log, and the same will follow as the logs are added.
The error log for the Test Unit Ready command will not be displayed as
a command log.
4
4
5
2
1
1
1
2
3
4
5
2
3
3
• 2nd screen (ATA/ATAPI DEBUG OSD-Command history [ERROR])
• 3rd screen (ATA/ATAPI DEBUG OSD-Drive maintenance data)