Pioneer BDP-05FD - Elite Blu-Ray Disc Player, Operating Instructions Manual

Page: 49 / 72

06
49
En
3 Select the terminal for outputting video signals.
Use

/

to select, then press

.
When a digital output is selected for the video output terminal,
Video is fixed at HDMI and cannot be changed.
When an analog output is selected for the video output terminal,
Component Video or S-Video/Video can be selected for Video .
• HDMI – HDMI OUT terminal
• Component Video – COMPONENT VIDEO output terminals
• S-Video/Video – S-VIDEO output terminal or VIDEO output
terminal
The video and audio signals output from the set output terminals are
output synchronously (lip synchronization).
4 Select the terminal for outputting audio signals.
Use

/

to select, then press
ENTER
.
• HDMI – HDMI OUT terminal
•
Digital Audio
–
DIGITAL OUT
terminal (
COAXIAL
/
OPTICAL
)
• Analog Audio – AUDIO OUT (2 ch) terminals or AUDIO OUT
(7.1 ch) terminals
The optimum audio signals for the audio format and the player’s
settings are output from the output terminal(s) set here.
Caution
• If the output terminal you want to select at
Video
is not
displayed, use the
VIDEO SELECT
button to switch between
digital and analog output (page 24).
• When S-Video/Video or Component Video is selected at
Video , no sound will be output if HDMI is selected at Audio (the
warning message shown below is displayed). When listening to
the audio by the HDMI-compatible device, connect to the TV
with the HDMI cable to watch the video (pages 14 and 17).
• Linear PCM (2-channel) audio signals are output from the audio
terminals other than the one set at Audio , regardless of the
audio format and the player’s settings.
Restoring all the settings to the
factory default settings
1 Check that the player’s power is turned on.
2 When a disc is playing, press

to stop playback.
Eject the disc from the player.
3 While pressing

, press

STANDBY/ON.
Operate using the buttons on the player’s front panel.
Note
• After restoring all the settings to the factory default settings, use
Setup Navigator to reset the player (page 20).
TOP MENU TOOLS
HOME
MENU
RETURN
ENTER
Audio
Out p ut Te r minal P r io r ity Video Out
Audio Out
S p eake r s
HDMI
Language
Pa r ental Lock
O
p
tions
Setu p Navigato r
Initial Setup
BD PLAYER
Video
Analog Audio
S-Vi d eo/Vi d eo
Yes No
Audio is not out p ut f r om HDMI
te
r
minal when [S-Video/Video] o
r
[Com p onent Video] is selected.
OK to select this setting?