After Installing this
Navigation System
1
Reconnecting the battery.
First, double-check that all connections are
correct and that this product is installed cor-
rectly. Reassemble all vehicle components
that you previously removed. Then reconnect
the negative (
–
) cable to the negative (
–
) term-
inal of the battery.
2
Start the engine.
3
Press RESET button.
Press
RESET
button on the navigation unit
using a pointed object such as the tip of a
pen.
4
Make the following settings:
=
For details concerning operations, refer to
“
Operation Manual
”
.
1
Set the language.
2
Drive an unobstructed road until the GPS
starts receiving the signal normally.
3
Make some necessary adjustments.
!
Setting the time
!
Setting the units and the date format,
etc.
!
Change other settings as you prefer
Note
After installing this navigation system, be sure to
check at a safe place that the vehicle is perform-
ing normally.
After Installation
En
28
Section
05
