Pioneer AVIC-X940BT, Service Manual

Page: 137 / 292

AVIC-X940BT/XNUC
137
5 6 7 8
5 6
7
8
C
D
F
A
B
E
7. DISASSEMBLY
1
1
2
2
2
3
2 2
Fig.3
Fig.2
Fig.1
- Removing the Monitor Assy (Fig.1, 2)
- Removing the CC Monitor Unit (Service) (Fig. 3)
Disconnect the five connectors.
Disconnect the Cord Assy using GGF1539
(See Fig.4).
Remove the four screws and then remove
the
CC Monitor Unit (Service)
.
Remove the four screws. (Fig.1)
Release the six latches.(Fig.2)
Disconnect the two connectors and then
remove the Monitor Assy.(Fig.2)
While the photograph shown is slightly different from this model in shape, the disassembly procedure is the same.
3
1
3
3
3
1
1 1
1
1
2
1
3
3
1
2 2
2 2
Monitor Assy
CC Monitor Unit (Service)
Cord Assy
Attention at assembly:
A lever of the connector is small.
Lock it surely.
Attention at assembly:
Pay attention to the direction of FFC.
1