Pioneer AVIC-N2, Service Manual

Page: 307 / 312

AVIC-N2/XU/UC
307
5 6 7 8
5 6
7
8
C
D
F
A
B
E
Fuse
holder
Black
(ground)
T
o
vehicle (metal) body.
Fuse resistor Fuse resistor
With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers.
White White/black
Gray
Gray/black
Green Green/black
Front
speaker
Rear
speaker
Front
speaker
Rear
speaker
Left
Right
+ +
+ +
GUIDE ON SYSTEM REMOTE CONTROL
Blue To Auto-antenna relay control terminal (max. 300 mA 12 V DC).
When the auto antenna function is used by connecting the blue lead to the vehicle with the auto antenna function, either turning off the ignition switch or detaching the front panel will retract the auto antenna of the vehicle.
Audio source will be set to mute or attenuate, while the voice guidance of the navigation will not be muted or attenuated.
Note:
Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied manuals of both prod- ucts and connect cords that have the same function.
Display unit
Note:
Note:
Yellow/black If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections.
Violet
Violet/black
Yellow To terminal always supplied with power regardless of ignition switch position. Red To electric terminal controlled by ignition switch (12 V DC) ON/OFF.
Orange/white To lighting switch terminal.
_ _
_ _
Light green To Parking brake