Pioneer AVIC-F200BT, Operation Manual

Page: 115 / 188

Using the touch panel keys
6 4
3
2
1
5
1
Sends a 1 key to 6 key command
The external unit can be operated by transmit-
ting the operating commands set to
1
key
through 6 key.
p
Operation varies depending on the ex-
ternal unit connected. (In some cases,
some functions may not be used until
you touch and hold the key.)
2
Sends a command [
a
] , [
b
] , [
c
] , or [
d
]
Touch to operate the external unit.
p
Operation varies depending on the ex-
ternal unit connected. (In some cases,
some functions may not be used until
you touch and hold the key.)
3
Switches between automatic and manual
function
You can turn automatic and manual function
on or off.
You can switch between
Auto
and
Manual
functions of the external unit connected.
Initially, this function is set to
Auto .
p
Operating commands set for Auto and
Manual operations vary depending on
the external unit connected.
4
Uses F1 through F4 to operate the external
unit
The external unit can be operated by transmit-
ting the operating commands set to
F1
through
F4
.
p
The operating commands set to F1
through
F4
vary depending on the exter-
nal unit.
p
Some functions may not be used until
you touch and hold the key.
5
Sends a band command
Touch to send a band command to the exter-
nal unit.
p
Operation varies depending on the ex-
ternal unit connected. (In some cases,
the external unit may not respond.)
6
Recalls equaliser curves
=
For details, refer to Using the equaliser
on page 139.
Engb
115
Chapter
25
Using
the
exter
nal
unit
(
EXT1
,
EXT2
)
Using the external unit ( EXT1 , EXT2 )