Pioneer AVIC-F10BT, Service Manual, Page: 97 / 337

AVIC-Z110BT/XN/UC
97
5 6 7 8
5 6
7
8
C
D
F
A
B
E
2. Calibration Test
Touch the illustrated points in order.
Unlike the line touch panel test, move to the next point after touching.
You are not able to exit from the test until all 17 points are touched.
When touching on 17 points is completed and calibration is successful,
[FINISHED] is displayed and if the calibration is unsuccessful, [NG] is displayed.
Return to main menu with [HOME] key.
3. User Calibration Confirmation
The following is displayed when
User already performed calibration Executed
User not performed yet calibration Not executed
1. Line Touch Panel Test
Touch the illustrated points in order.
If touched incorrectly, + mark is displayed in red.
When the touching proceeded to the final point of four (4), [OK] is displayed and the test is completed.
When depressing [HOME] key, [NG] is displayed and return to the menu screen.
The condition to be OK (move to the next point) when illustrated point is
touched is that the touched point should be within the following range;
10[dot] If the touched point is within 10 dots from the center,
the touch is determined as valid.
10[dot]
10[dot] 10[dot]