Pioneer AVIC-D3/XU/EW5, Service Manual

Page: 219 / 306

AVIC-D3/XU/UC
219
5 6 7 8
5 6
7
8
C
D
F
A
B
E
T P E F F E C T I V E R A N G E
[ B E F O R E A F T E R ]
M I N - X [ 9 9 9 9 9 9 ]
M A X - X [ 9 9 9 9 9 9 ]
M I N - Y [ 9 9 9 9 9 9 ]
M A X - Y [ 9 9 9 9 9 9 ]
[ C A U T I O N ]
P L E A S E T O U C H A R O U N D P A N E L
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
1
2
3
4
5
6
7
8
9
[The list of AFTER initial value]
Coordinate Minimum value Maximum value
X 126 161
Y 126 161
[The list of initial setting value at the time of EEPROM reset]
Coordinate Minimum value Maximum value
X 42 247
Y 51 238
[The list of AFTER setting allowable range]
Coordinate Minimum value Maximum value
X 0 to 125 162 to 255
Y 0 to 125 162 to 255
-
TP EFFECTIVE RANGE
Screen configuration
Trace the white line displayed on the each four corner of touch panel with a soft stick(ex. wooden toothpick), and the
setting values are saved in the EEPROM.
Operational specifications
Touch on the touch panel, and check the outermost circumference.
OK (NG) is displayed in the screen center by the SOURCE key, and 2 seconds later, the screen will return to the
top MENU.
Details of the process
After pressing the SOURCE key, the setting values are judged.
If the value is within the allowable range, the upper limit and the lower limit of the setting value and the normal
ending information are saved in the EEPROM and OK is displayed. After 2 seconds, the screen will return to the
top MENU.
If the setting value is outside of the range, the upper limit and the lower limit values are not saved in the EEPROM,
NG ending information is saved and NG is displayed. After 2 seconds, the screen will return to the top MENU.
The initial values and the setting value allowable range are as shown below.