Pioneer AVH-X8690BT, Owner'S Manual

Page: 43 / 80

18
Chapter
43
Engb
p
Do not turn off the engine while saving
the adjusted position data.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The “ System ” screen appears.
3 Touch [Touch panel calibration].
The touch panel adjustment screen appears.
4 Touch two corners of the screen
along the arrows, and then touch
the centres of two + marks at the
same time twice.
5 Press the HOME button.
The adjustment results are saved.
6 Press the HOME button once again.
Proceed to 16-point adjustment.
If you press and hold the HOME button,
the adjustment is cancelled.
7 Gently touch the centre of the +
mark displayed on the screen.
The target indicates the order.
After you touch all marks, the adjusted posi-
tion data is saved.
If you press the HOME button, the previ-
ous adjustment position returns.
If you press and hold the HOME button,
the adjustment is cancelled.
8 Press and hold the HOME button.
The adjustment results are saved.
Adjusting the picture
You can adjust the picture for each source
and rear view camera.
CAUTION
For safety reasons, you cannot use some
of these functions while your vehicle is in
motion. To enable these functions, you must
stop in a safe place and apply the hand-
brake. Refer to Important Information for the
User (a separate manual).
1 Display the screen you wish to
adjust.
2 Press the HOME button to display
the Top menu screen.
3 Touch the following keys in the
following order.
The “ System ” screen appears.
4 Touch [Picture Adjustment].
5 Touch any of the following keys to
select the function to be adjusted.
Picture adjustment items are displayed.
Brightness :
Adjusts the black intensity.
Contrast :
Adjusts the contrast.
Color :
Adjusts the colour saturation.
Hue :
Adjusts the tone of colour (which colour
is emphasised, red or green).
Dimmer :
Adjusts the brightness of the display.
Temperature :
Adjusts the colour temperature, resulting
in a better white balance.
p
You can adjust Hue only when the colour
system is set to NTSC.
If you touch [ Rear View ], the mode
changes to the selected camera mode. By
touching [ Source ], [ Navi ] or [ Apps ], you
can return to the selected mode.
6 Touch the following keys to adjust
the selected item.
Decreases the level of the
selected item.
Increases the level of the
selected item.
Selects the adjustable previous
item.
Selects the adjustable next item.
Each time you touch the key, the level of the
selected item increases or decreases.
p
“ Brightness ”, “ Contrast ”, “ Color ” and
“ Hue ” can be adjusted from “ -24 ” to
“ +24 ”.
p
“ Dimmer ” can be adjusted from “ +1 ” to
“ +48 ”.
p
“ Temperature ” can be adjusted from
“ +3 ” to “ -3 ”.
p
The adjustments of “
Brightness
” and
“ Contrast ” are stored separately when
your vehicle’s headlights are off (daytime)
and when your vehicle’s headlights
are on (nighttime). These are switched
automatically depending on whether the
vehicle’s headlights are on or off.
p
The adjustment of “ Dimmer ” is stored
separately when your vehicle’s headlights
are off (daytime) and when your vehicle’s
headlights are on (nighttime). “ Dimmer ”
is switched automatically only when the
value of nighttime is lower than that of
daytime.
p
The picture adjustment may not be avail-
able with some rear view cameras.
p
The setting contents can be memorised
separately for the following screens and
video images.
—
DVD , Video CD and Disc
—
AV
—
USB (Video), USB (JPEG) and
MirrorLink
—
SD (Video) and SD (JPEG)
—
HDMI and AppRadio Mode (HDMI)
—
MIXTRAX, images output from the exter-
nal device
#HROK@XHMFÐSGDÐÆQLV@QDÐ
version
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The “ System ” screen appears.
3 Touch [System Information].
4 Touch [Firmware Information].
The “ Firmware Information ” screen
appears.
4OC@SHMFÐÆQLV@QD
CAUTION
The only USB port that supports the
firmware update is USB port 1.
Never turn this product off, eject the SD
memory card or disconnect the USB
storage device while the firmware is
being updated.
You can only update the firmware when
the vehicle is stopped and the handbrake
is engaged.
1 Download the firmware update
files.
2 Connect a blank (formatted) SD
memory card or USB storage
device to your computer, and then
locate the correct update file and
copy it onto the SD memory card or
USB storage device.
3 Turn the source off.
For details, refer to Turning off the AV
source on page 11.
4 Press the HOME button to display
the Top menu screen.
5 Touch the following keys in the
following order.
The “ System ” screen appears.
6 Touch [System Information].