Pioneer AVH-X8500BHS, Owner'S Manual

Page: 38 / 228

Adjusting source levels
With SLA (source level adjustment), the volume
levels of each source can be adjusted to prevent
significant differences between sources.
!
Settings are based on the FM volume level,
which remains unchanged.
1 Press the home button to switch to the
home display.
2 Touch the audio function key to open the
audio menu.
3 Compare the FM volume level with the
level of the source you wish to adjust.
4 Touch Source Level Adjuster on the audio
function menu.
5 Touch or to adjust the source vol-
ume.
Range: +4 to
–
4
Notes
!
Source Level Adjuster is not available when
FM is selected as the source.
!
The AM volume level can also be adjusted
with this function.
!
Video CD, CD, compressed audio, DivX,
MPEG-1, MPEG-2 and MPEG-4 are automati-
cally set to the same source level adjustment
volume.
!
When an iPod and a USB storage device are
connected to USB input 1 or USB input 2, the
source level adjustment volume for each is
automatically set to the same level for each
USB input. USB input 1 and USB input 2 are
not automatically set to the same setting.
Setting the subtitle language
You can set a desired subtitle language. When
available, the subtitles will be displayed in the
selected language.
1 Press the home button to switch to the
home display.
2 Touch the video setup key to open the
video setup menu.
3 Touch Subtitle Language on the
Video Setup menu.
A subtitle language menu is displayed.
4 Touch the desired language.
The subtitle language is set.
#
If you have selected Others , refer to When you se-
lect Others on page 38.
Notes
!
If the selected language is not available, the
language specified on the disc is displayed.
!
You can also switch the subtitle language by
touching the switch subtitle languages key
during playback.
!
The setting made here will not be affected
even if the subtitle language is switched dur-
ing playback using the switch subtitle lan-
guages key.
When you select Others
A language code input display is shown when
Others is selected. Refer to Language code chart
for DVD on page 68.
%
Touch 0 to 9 to input the language code.
#
To cancel the entered numbers, touch C .
#
To register the code, touch the following touch
panel key.
Registering the code.
Setting the audio language
You can set the preferred audio language.
1 Press the home button to switch to the
home display.
2 Touch the video setup key to open the
video setup menu.
3 Touch Audio Language on the Video
Setup menu.
An audio language menu is displayed.
4 Touch the desired language.
The audio language is set.
#
If you have selected
Others
, refer to When you se-
lect Others on page 38.
Notes
!
If the selected language is not available, the
language specified on the disc is used.
!
You can also switch the audio language by
touching the switch audio languages key
during playback.
!
The setting made here will not be affected
even if the audio language is switched dur-
ing playback using the switch audio lan-
guages key.
Setting the menu language
You can set the preferred language in which the
menus recorded on a disc are displayed.
1 Press the home button to switch to the
home display.
Audio adjustments
38
Section
Setting up the video player
En
17
18
<YRD5376-A/N>38