Pioneer AVH-X7700BT, Operation Manual

Page: 8 / 66

8
Inserting a disc
X3700DAB X2700BT

Insert a disc into the disc-loading slot.
Ejecting a disc
X3700DAB X2700BT

Press button to eject a disc.
Plugging and unplugging a USB stor-
age device
p
This product may not achieve optimum performance with
some USB storage devices.
p
Connection via a USB hub is not possible.
p
A USB cable is required for connection.
1 Pull out the plug from the USB port of the USB
cable.
2 Plug a USB storage device into the USB cable.
2
1
1 USB cable
2
USB storage device
Check that no data is being accessed before pulling out the
USB storage device.
On first-time startup
1 Start the engine to boot up the system.
After a short pause, the splash screen comes on for a few
seconds.
The “ Select Program Language ” screen appears.
p
From the second time on, the screen shown will differ
depending on the previous conditions.
2 Touch the language that you want to use on
screen.
3 Touch .
The “ Setting Location ” screen appears.
X2700BT
The “ Speaker Mode Setting ” screen appears. Skip to step 6.
4 Touch the item to select the using location.
5 Touch
.
The “ Speaker Mode Setting ” screen appears.
6 Touch the speaker modes that you want to use.
●
Standard Mode
4-speaker system with front and rear speakers, or a
6-speaker system with front and rear speakers and
subwoofers.
●
Network Mode
2-way+SW Multi amp, multi-speaker system with high
speaker, mid speaker and subwoofer for reproduction of
high, middle and low frequencies (bands).
WARNING
Do not use the unit in standard mode when a speaker system
for 3-way network mode is connected to this unit. This may
cause damage to the speakers.
7 Touch [
OK
].
The “ DAB ANTENNA POWER SETTING ” screen appears.
X2700BT
The “
Smartphone Setup
” screen appears. Skip to step 10.
8 Touch [ Yes ] to use the DAB antenna power.
 Switching Digital Radio antenna power supply on page 19
9 Touch [ OK ].
The “ Smartphone Setup ” screen appears.
10 Touch the item you want to set.
 Information on the connections and functions for each device
on page 17
11 Touch .
The top menu screen appears.
p
Once the speaker mode is set, the setting cannot be
changed unless this product is restored to the default
settings. Restore the default settings to change the speaker
mode setting.
 Restoring the default settings on page 55
Switching the speaker mode
 Restore the default setting.
 Restoring the default settings on page 55
< CRB4437-A >
Basic operation