Pioneer AVH-P8450BT, Owner'S Manual

Page: 95 / 124

1 Install the holder into the dashboard.
After inserting the holder into the dashboard,
select and bend the tabs appropriate to the
thickness of the dashboard material. (Install
this unit as firmly as possible using the top
and bottom tabs. To secure this unit, bend the
tabs 90 degrees.)
1
2
1
Dashboard
2
Holder
(factory-supplied part)
2 Install this unit.
1
1
Dashboard
Installation using the screw
holes on the side of the unit
%
Fastening the unit to the factory radio-
mounting bracket.
Position the unit so that its screw holes are
aligned with the screw holes of the bracket,
and tighten the screws at 3 locations on each
side.
1
2
3
5
4
1
If the pawl gets in the way, bend it down.
2
Factory radio mounting bracket
3
Truss (5 mm × 8 mm) screws
4
Frame
In some types of vehicles, discrepancy may
occur between the unit and the dashboard.
If this happens, use the supplied frame to
fill the gap.
5
Dashboard or console
Removing the unit
for Middle East Asian and South African models
En
95
Section
15
Installation
Installation