Pioneer AVH-P7950DVD, Operation Manual

Page: 82 / 138

By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.
!
Switching the sound settings
( SOUND SETTING )
!
Using the position selector ( POSITION )
!
Customizing the speaker setting
( SPEAKER SETTING )
!
Using the cut-off frequency ( CUT OFF )
!
Adjusting the time alignment
( TIME ALIGNMENT )
!
Adjusting the speaker output levels
(
SPEAKER LEVEL
)
!
Adjusting 3-band parametric equalizer
( PARAMETRIC EQ ) (when selecting multi-
channel mode only)
!
Adjusting 13-band graphic equalizer
( GRAPHIC EQ ) (when selecting 2-channel
mode only)
Extra functions
These functions are helpful in adjusting the
sound to suit your system or your personal
preferences.
!
Using balance adjustment
( FADER/BALANCE )
!
Adjusting source levels
( SOURCE LEVEL ADJUSTER )
!
Using the direct control (
Digital Direct
)
!
Listening in surround sound ( Dolby/DTS )
(when selecting multi-channel mode only)
!
Using the dynamic range control
( DYNAMIC RANGE CONTROL )
!
Using the down-mix function
(
DOWN MIX
)
Introduction of audio
adjustments
1 1 1
1
Audio display
Shows the audio function names.
1 Touch AV MENU to display the audio
function names.
The audio function names are displayed and
operable ones are highlighted.
#
When selecting the FM as the source, you
cannot switch to SOURCE LEVEL ADJUSTER .
#
When selecting 2-channel mode, you cannot
switch to Dolby/DTS .
2 Touch ESC to return to the display of
each source.
#
To return to the previous display, touch
BACK .
Using balance adjustment
You can change the fader/balance setting so
that it can provide you an ideal listening envir-
onment in all occupied seats.
1 Touch FADER/BALANCE on the audio
function menu.
Audio Adjustments
En
82
Section
17
Downloaded from Caradio-Manual.com Manuals