Setting the speaker setting
You can make a fine adjustment on each
speaker installed in your vehicle. You can
change the size of each speaker according to
the speaker specification. On a spot at which
a speaker is not installed, you can set the ad-
justment to
OFF
.
The adjustment you made will be memorized
into this unit and you can recall it.
Recalling speaker settings
%
Touch SPEAKER SETTING on the sound
setting menu to select the speaker setting.
Touch
SPEAKER SETTING
repeatedly to switch
between the following speaker settings:
CUSTOM1
—
CUSTOM2
—
CUSTOM3
—
AUTO
—
LAST MEMORY
#
You can select
LAST MEMORY
only when the
adjusted speaker setting is not memorized in this
unit.
#
You cannot select
AUTO
when
NETWORK
has been selected. (Refer to
Switching the DSP
setting mode
on page 104.)
#
When
STANDARD
has been selected, you
cannot select
AUTO
if auto TA and EQ has not
been carried out.
Customizing the speaker setting
You need to make with/without (or yes/no) and
size (bass reproducing capacity) selection/ad-
justments depending on the installed speak-
ers. The size needs to be set to
LARGE
(large)
if the speaker is capable of reproducing
sounds of about 100 Hz or below. Otherwise
select
SMALL
(small).
!
Low frequency range is not output if the
subwoofer is set to
OFF
and the front and
rear speakers set to
SMALL
or
OFF
.
!
It is imperative that non-installed speakers
be set to
OFF
.
!
Set the front or rear speaker to
LARGE
if
the speaker is capable of reproducing bass
content, or if no subwoofer is installed.
1
Recall the speaker setting you want to
adjust.
Refer to
Recalling speaker settings
on this
page.
2
Touch ADJ. next to SPEAKER SETTING
on the sound setting menu.
3
Touch
or
to select the correct size
for the speaker.
Each time you touch
or
it selects the size
in the following order:
OFF
(off)
—
SMALL
(small)
—
LARGE
(large)
#
You cannot select
OFF
in the front speaker set-
ting.
#
You can turn
ON
or
OFF
in the subwoofer set-
ting.
#
When the rear speaker setting is set to
OFF
,
the rear center speakers switch to
OFF
automati-
cally.
Note
You can store the adjusted setting in memory by
using
MEMORY
. For details concerning opera-
tion, refer to
Storing the adjusted audio settings in
memory
on page 91.
Using the cut-off frequency
You can adjust the cut-off frequency and slope
to match the characteristics of each speaker
unit. And then you can store the adjusted cut-
off frequency in this unit for later recall.
Audio Adjustments
En
87
Section
17
Audio
Adjustments
Summary of Contents for AVH-P7850DVD
Page 130: ...En 130 ...
Page 131: ...En 131 ...
