Pioneer AVH-P6050DVD, Operation Manual

Page: 78 / 119

1 Touch SPEAKER SETTING on the DSP
function menu.
2 Touch
c
or
d
to select the speaker to
be adjusted.
Each time you touch
c
or
d
selects the speak-
er in the following order:
FRONT
(front speakers)
—
CENTER
(center
speaker)
—
REAR (rear speakers)
—
SUB WOOFER (subwoofer)
—
PHASE (subwoo-
fer setting)
#
You can switch to
PHASE
only when the sub-
woofer has been set to
ON
.
3 Touch
c
or
d
to select the correct size
for the selected speaker.
Each time you touch
c
or
d
selects the size in
the following order:
Speaker Setting
FRONT SMALL
—
LARGE
CENTER OFF
—
SMALL
—
LARGE
REAR OFF
—
SMALL
—
LARGE
SUB WOOFER ON
—
OFF
PHASE REVERSE
—
NORMAL
Correcting the subwoofer
’
s phase
If trying to boost the bass output of the sub-
woofer doesn
’
t do much or rather makes you
feel that the bass gets more murky, this may
indicate that the subwoofer
’
s output and bass
content you hear over other speakers cancel
each other out. To remove this problem, try
changing the phase setting for the subwoofer.
1 Touch SPEAKER SETTING on the DSP
function menu.
2 Touch
c
or
d
to select SUB WOOFER.
Each time you touch
c
or
d
selects the speak-
er in the following order:
FRONT (front speakers)
—
CENTER (center
speaker)
—
REAR (rear speakers)
—
SUB WOOFER (subwoofer)
—
PHASE (subwoo-
fer setting)
3 Touch
c
to turn subwoofer output on.
#
To turn subwoofer output off, touch
d
.
4 Touch
d
to select PHASE and then
touch
c
or
d
to select the phase of sub-
woofer output.
Touch
d
to select NORMAL (normal phase).
Touch
c
to select
REVERSE
(reverse phase).
Note
When playing a 2-channel mono source with Pro
Logic turned on, there may be occasions when
the following will occur:
!
No audio is outputted if the center speaker
setting is
SMALL or LARGE and no center
speaker is installed.
!
Audio is heard only over the center speaker if
installed and the center speaker setting is
SMALL or LARGE .
Adjusting the speaker
output levels
Speaker level can be adjusted finely by listen-
ing to an audio output. First, use test tone to
adjust the approximate speaker level, and then
use this function to adjust finely.
1 Touch SPEAKER LEVEL on the DSP func-
tion menu.
2 Touch
c
or
d
to select the speaker to
be adjusted.
Each time you touch
c
or
d
selects the speak-
er in the following order:
Digital Signal Processor
En
78
Section
17