4
Display the system menu.
Refer to
Introduction of menu operations
5
Touch Auto EQ Measurement to enter
auto EQ measurement mode.
6
Plug the microphone into the micro-
phone input jack on this unit.
(AVH-P3400BH/AVH-P2400BT/AVH-
P1400DVD)
(AVH-P4400BH)
7
Touch Start to start auto EQ.
8
When the 10-second countdown starts,
get out of the car and close the door within
10 seconds.
A measurement tone (noise) is emitted from
the speakers, and auto EQ measurement be-
gins.
When auto EQ is completed,
Complete
is dis-
played.
When the car
’
s interior acoustic characteris-
tics cannot be measured correctly, an error
message will be displayed. (Refer to
standing auto EQ error messages
#
It takes about nine minutes for auto EQ mea-
surement to be completed when all the speakers
are connected.
#
To stop auto EQ, touch
Stop
.
9
Store the microphone carefully in the
glove compartment or another safe place.
If the microphone is subjected to direct sun-
light for an extended period, high tempera-
tures may cause distortion, color change or
malfunction.
10 Press
h
(eject) to close the panel.
(AVH-P4400BH only)
En
70
Section
15
Menu operations