Connection method
1. Clamp the lead.
2. Clamp firmly with
needle-nosed pliers.
Note:
· The position of the parking brake switch depends on the vehicle model. For details,
consult the vehicle Owner’s Manual or dealer.
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that
equipment. If not, keep the Audio Mute lead free of any connections.
Light green
Used to detect the ON/OFF status of the parking
brake. This lead must be connected to the power
supply side of the parking brake switch.
Blue/white
Connect to system control terminal of the power amp or
auto-antenna relay control terminal (max. 300 mA 12 V DC).
Ground side
Power supply side
Parking brake
switch
With a 2 speaker system, do not connect anything to the speaker leads
that are not connected to speakers.
Note:
· Change the initial setting of this unit.
The subwoofer output of this unit is
monaural.
Violet/white
Of the two lead wires connected to the back lamp, connect the one in which the voltage changes
when the gear shift is in the REVERSE (R) position. This connection enables the unit to
sense whether the car is moving forwards or backwards.
Microphone (AVH-P4450BT/AVH-2450BT only)
4 m
Wired remote input
Hard-wired remote control adaptor can be connected
(sold separately).
When you connect the separately sold
multi-channel processor (e.g., DEQ-P6600/
DEQ-P7650) to this unit, do not connect
anything to the speaker leads and system
remote control (blue/white).
<CRB3733-B/U>79
En
79
Section
14
Installation
Installation
Summary of Contents for AVH-1450DVD
Page 111: ... CRB3733 B U 111 En 111 ...