!
After you set up the rear view camera set-
ting, move the shift lever to
REVERSE (R)
and confirm that the rear view camera
video is shown on the display.
!
Change this setting if the display switches
to the rear view camera video by error while
you are driving forward.
!
To stop watching the rear view camera
video and return to the source display,
press and hold
MUTE
.
!
Touch the
RearView
source icon to display
the rear view camera image while driving.
Touch the source icon again to turn the
rear view camera off. For details, refer to
lecting a source using the touch panel keys
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch Camera Polarity on the system
menu to select the appropriate setting.
!
Battery
–
When the polarity of the con-
nected lead is positive while the shift lever
is in
REVERSE (R)
position
!
Ground
–
When the polarity of the con-
nected lead is negative while the shift lever
is in
REVERSE (R)
position
!
Off
–
When a rear view camera is not con-
nected to this unit
Note
You can also switch the rear view image by press-
ing the touch key, regardless of the
Camera Polarity
setting on the sytem menu.
Refer to
Selecting the video format
You can switch the video output format of
V
OUT
between NTSC and PAL.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch Video Output Format on the sys-
tem menu to select the video output for-
mat.
NTSC
—
PAL
Note
You can switch the video output format only for
the source from this unit.
Setting the video signal
When you connect this unit to an AV equip-
ment to this unit, select the suitable video sig-
nal setting.
!
As this function is initially set to
Auto
, the
unit will automatically adjust the video sig-
nal setting.
!
You can operate this function only for the
video signal input into the AV input.
1
Display the system menu.
Refer to
Introduction of menu operations
2
Touch Video Signal Setting on the func-
tion menu.
Video Signal Setting
items are displayed.
!
AV
–
Adjusts the AV video signal
!
AUX
–
Adjusts the AUX video signal
!
Camera
–
Adjusts the rear view camera
video signal
3
Touch
c
or
d
to select the desired
video signal appears.
Auto
—
PAL
—
NTSC
—
PAL-M
—
PAL-N
—
SECAM
Selecting the area group
1
Select the TV source.
Refer to
2
Display the system menu.
Refer to
Introduction of menu operations
3
Touch TV Country Group on the func-
tion menu.
4
Touch
c
or
d
until the desired area
group appears.
Country1
(CCIR channel)
—
Country2
(IN
channel)
—
Country3
(CHN channel)
—
Country4
(U.K. channel)
—
Country5
(OIRT
channel)
—
Country6
(AUSTRALIA channel)
—
Country7
(SAF channel)
<CRB3733-B/U>66
En
66
Section
12
Menu operations
Summary of Contents for AVH-1450DVD
Page 111: ... CRB3733 B U 111 En 111 ...