31
3. Install the mounting arm on the boots of the headrest shafts.
If the mounting arm does not securely fit due to the shape or the material of the seat, use
the supplied rubber spacers to install the mounting arm.
4. Pass the headrest shaft through the holes of the shaft guides and return the
headrest to its original position.
5. Open the arm and adjust the position and the angle. Determine the display
installation position.
Installation
Slide the mounting arm from the right
to the left while holding it down.
Slide the U-shaped brackets into the gaps
between the boots and the surface of the seat.
Boots
U-shaped bracket
Peel off the protective sheets from the spacers,
then affix the spacers onto the plastic of the
mounting arm.
To push the lock release
button, insert your finger
through the opening.
Lower the headrest to its original position.
Remove the hexagonal wrench from
the mounting arm to use it later.
Rotate the arm head till the knob
points in a downward direction.
Rotate the
arm head.
Turn the knob
counterclockwise.
Open the arm fully.
Never use the system if the
arm is not fully opened.
