Pioneer Asterix ST-EP4 Installation Manual Download Page 4

Page: 4 / 4

Printer Installation Guide

Connect the other end of the RJ-45 Ethernet cable to the desired COM port on the

computer. In our example below, we are connecting our printer to COM2.

Note:

It is a good

idea to note down which COM port the printer has been connected for future reference as you

will need this information when configuring the printer(s) in the Hula software.

Your printer is now physically connected to the station. For instructions on enabling and

configuring printers in the HulaPOS software, please refer to our

Getting Started Guide

Summary of Contents for Asterix ST-EP4

Page 1: ...Printer Installation Guide 1 Asterix ST EP4 Printer Installation Guide This guide will walk you through connecting the Asterix ST EP4 printer to an Altametrics e Smart All in One Station ...

Page 2: ...er it is already connected by default to COM1 on the computer It is also possible however to connect an Asterix ST EP4 thermal remote printer to an S Line Series terminal to work with Hula POS by following the steps outlined below 1 Connect the included black 25 pin DB connector to the labeled 25 pin RS 232 port on the back of the printer ...

Page 3: ...ion Guide 3 2 Connect the power supply to the designated 24V power port also located on the back of the printer 3 Connect the included RJ 45 Ethernet printer cable to the 25 pin DB connector that we connected in Step 1 ...

Page 4: ...to COM2 Note It is a good idea to note down which COM port the printer has been connected for future reference as you will need this information when configuring the printer s in the Hula software 5 Your printer is now physically connected to the station For instructions on enabling and configuring printers in the HulaPOS software please refer to our Getting Started Guide ...