manualshive.com logo in svg

Pioneer ANH-P10MP, Operation Manual

Share
Download
Pioneer ANH-P10MP Operation Manual Download Page 94

Initial Settings

En

12

Section

94

Switching the guidance 
display for intersection

The display can be magnified around an inter-
section to facilitate navigation (only when the 
source is turned off). 

1

With the source turned off, press and 

hold  

1.

2

Press NEXT and then press N.INT to se-

lect the intersection display mode.

3

Press N.INT to turn the enlarged dis-

play off.

 “

OFF

” appears on the display.

Press 

N.INT

 again to turn the enlarged dis-

play on.

Setting the rear output 
and subwoofer controller

This product’s rear output (rear speaker leads 
output and RCA rear output) can be used for 
full-range speaker (

FULL Preout :FULL

) or 

subwoofer (

SUB.W

) connection. If you switch 

the rear output setting to “

SUB.W

”, you can 

connect a rear speaker lead directly to a sub-
woofer without using an auxiliary amp.
Initially, the unit is set for rear full-range 
speaker connection (

FULL Preout :FULL

). 

When rear output is connected to full range 
speakers (when “

FULL Preout :FULL

” is se-

lected), you can connect the RCA subwoofer 
output to a subwoofer. In this case, you can 
select whether to use the subwoofer control-
ler’s (low pass filter, phase) built-in 

FULL Pre-

out :SUB.W

 or the auxiliary 

FULL Preout 

:FULL

.

1

With the source turned off, press and 

hold 1.

2

Press NEXT and then press REAR to se-

lect the rear output setting mode.

3

Press SW or FULL to select the desired 

output setting.

Pressing 

SW

 or 

FULL

 will switch between 

“

FULL

” (full-range speaker) and “

SUB.W

” 

(subwoofer), and that status will be displayed.

When no subwoofer is connected to the rear 

speaker lead output, select “

FULL Preout :FULL

”.

When a subwoofer is connected to the rear 

speaker lead output, select “

SUB.W

”.

When the rear output setting is “

SUB.W

”, you 

cannot change the subwoofer controller (Step 4).

4

Press 

 or 

 to switch the subwoofer 

output or nonfading output (full-range 
RCA output).

Pressing 

 or 

 will switch between

“

FULL Preout :SUB.W

” and “

FULL Preout 

:FULL

” and that status will be displayed.

When adjusting the subwoofer sound by us-

ing an external amplifier, set to “

FULL Preout 

:FULL

”.

When adjusting the subwoofer sound by us-

ing this product, set to “

FULL Preout :SUB.W

”.

Notes

• Even if you change this setting, there is no 

output unless you turn the nonfading output 
(refer to 

Using nonfading output

 on page 88) 

or subwoofer output (refer to 

Using subwoofer 

output

 on page 88) in the audio menu on.

• If you change the subwoofer controller, sub-

woofer output and nonfading output in the 
audio menu return to the factory settings.

Summary of Contents for ANH-P10MP














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands