Connecting up
02
7
En
English
Deutsch
Français
Nederlands
Italiano
Español
Ру
сский
Digital audio input connections
If you connect the
DIGITAL
IN
terminal of the unit and
the digital audio output of a digital audio device with a
separately sold digital cable, you can play the audio of
the digital audio device with the unit.
For details on the output of audio input to the
DIGITAL
IN
terminal, refer to page 11.
Note
• Digital signal formats that can be input to this unit
include linear PCM signals with sampling rate and
quantitative bits up to 192 kHz/32 bits. (Depending
on the connected device and environment,
operation may not be successful).
Using a USB cable to connect to a
computer
If a USB cable (sold separately) is used to connect this
unit’s
DIGITAL IN USB
terminal to a computer’s USB
port, music files located on the computer can be played
through this unit.
For more information regarding the output of audio
signals input to the
DIGITAL IN USB
terminal, consult
page 13.
Important
• A dedicated driver needs to be installed on your
computer (page 13).
Note
• This unit cannot be used to play audio files from a
computer unless Media Player is installed on the
connected computer.
LINE2
LINE2
LINE1
LINE1
USB
USB
COAXIAL
COAXIAL
DIGITAL IN
DIGITAL IN
G IN
ANALOG IN
OPTICAL
OPTICAL
LINE2
LINE2
OUT
OUT
CED IN
BALANCED IN
NORMAL
NORMAL
INVERSION
INVERSION
PHASE
PHASE
DIGITAL OUT
COAXIAL
DIGITAL OUT
OPTICAL
Digital audio
equipment, etc.
Coaxial digital audio cable
(sold separately)
A-70DA’s rear panel
Optical digital audio cable
(sold separately)
Digital audio
equipment, etc.
LINE2
LINE2
LINE1
LINE1
USB
USB
COAXIAL
COAXIAL
DIGITAL IN
DIGITAL IN
G IN
ANALOG IN
OPTICAL
OPTICAL
LINE2
LINE2
OUT
OUT
CED IN
BALANCED IN
NORMAL
NORMAL
INVERSION
INVERSION
PHASE
PHASE
USB
USB cable
(sold separately)
A-type
B-type
PC
A-70DA’s rear panel
Using centralized control with other
Pioneer components
Multiple Pioneer components equipped with
CONTROL
IN/OUT
jacks can be connected to the unit, allowing
centralized control of the components via the remote
sensor on the unit. This also allows remote control of
components not equipped with a remote sensor, or
installed in places where the component’s remote
sensor cannot be accessed.
Note
• For connections use a commercially available
monaural miniplug cord (without resistor).
• When connecting the
CONTROL IN/OUT
jacks,
commercially available audio cords must also be
used to make analog connections. Merely
connecting the
CONTROL IN/OUT
jacks alone will
not allow proper system control.
• When a control cord is connected to the unit’s
CONTROL IN
jack, the unit cannot be controlled by
pointing the remote control at the unit (the remote
sensor is automatically disabled).
Plugging in
Important
• When going on a trip or otherwise not using the
unit for an extended period, always disconnect the
power cord from its outlet. Note that various
internal settings will not be lost even if the power
cord is disconnected from its outlet for an extended
time.
• If it is necessary to detach the power cord, first be
sure to press the
/I STANDBY/ON
button on the
front panel of the unit so the unit is turned OFF
before detaching the cord.
Caution
• The use of a power cord other than the one provided
will invalidate the warranty, since Pioneer will not
be responsible for any damage incurred. (The
power cord provided with the unit has a rated
current capacity of 10 A.)
• Do not use any power cord other than the one
supplied with this unit.
• Do not use the supplied power cord for any purpose
other than that described below.
After you’ve finished making all connections, plug the
unit into an AC outlet.
1
Plug the supplied power cord into the
AC IN socket on the rear panel of the unit.
2
Plug the other end into an AC outlet.
IN
OUT
CONTROL
Other Pioneer
component equipped
with CONTROL IN/
OUT jacks
To other Pioneer
component
equipped with
CONTROL IN jack
A-70DA
Aim remote control
at the sensor on the
unit.
Remote
control
To AC outlet
This unit’s rear panel
Power cord
(included)
A70_SYXE8_0728.book 7 ページ ２０１５年７月２８日 火曜日 午後３時５４分
