Pioneer Eclipse StripVac, Operation Manual

Page: 4 / 28

M a c h i n e S p e c i f i c a t i o n s
S a f e O p e r a t i n g P r o c e d u r e s
Safe Operating Procedures:
•
Use care when transporting machine with a full tank.
•
Do not raise filled tank to check batteries.
•
Thoroughly clean exterior, tank, hoses, and squeegee after each use.
•
Do not use the machine as a dry vac, it is only intended for stripper, cleaning solutions, and water.
•
Always use appropriate safety gear when dumping stripper.
•
Obey all applicable laws for the disposal of stripper.
•
When the recovery tank reaches capacity, an overfill valve will seal the vacuum motor port. Do not
attempt to operate the machine after the vacuum motor port has been sealed.
•
Do not overtighten retaining knobs on squeegee. Knobs should be tightened enough to hold the
squeegee in place while allowing it to break away if struck.
•
To reduce foaming, add defoamer in tank before vacuuming stripper.
•
Turn off the vacuum motor when tank reaches capacity and closes the vacuum motor port.
Height: 44” (111,8 cm)
Width: 26” (66 cm)
Length: 39” (99,1 cm)
Squeegee length: 26” (66 cm) or 34” (86 cm)
Weight: 225 lb (102 kg) w/batteries, 130 lb (59 kg) w/out batteries
24V system
25A switch / breaker
120A charger plug
Tank Capacity Standard Model: 30 gal. (113,6 l)
Tank Capacity Low-Profile Model: 16.5 gal. (62,5 l)
Battery Compartment dimensions: 16.33” x 12.77” x 10” (41.48 cm x 32.44 cm x 25.4 cm)
Battery dimensions: 8.13” x 6.63” x 12” (20.65 cm x 16.84 cm x 30.48 cm)
Hand-arm vibration: 0.5 mm/sec
2
Overall sound level: 74 dB(A)
2