Pioneer Eclipse SPEEDSTAR ST21KWA, Operator'S Manual

Page: 3 / 30

z
Allow only qualified and trained personnel to
operate equipment.
z
Follow maintenance and operating instructions.
z
Keep accurate records of maintenance and
service in the provided log book.
z
Remember, routine maintenance NOW will
prevent a breakdown LATER.
z
Check oil level before starting.
z
Keep nuts and bolts tightened and hose
connections snug.
z
Refer to engine manufacturer’s service manual
or contact Amano Pioneer Eclipse for engine
repairs or adjustments not listed in this manual.
z
Never alter or reconstruct the fuel system. To
do so may be dangerous and will void the
factory warranty.
z
Use UL, CTC/DOT listed Safe-Fill™
cylinders supplied by Amano Pioneer Eclipse.
z
Be careful not to cross thread the Rego
coupling on the fuel cylinder.
z
Store the fuel cylinder outside away from heat
and direct sunlight.
z
Check pad holder for cracks each time the pad
is changed.
z
Have the machine serviced by a certified
technician, including an emission check, every
three (3) months.
z
Before attempting any service on the machine,
turn the ignition switch “OFF” and remove the
key to avoid accidental start-up.
WARNING: Operate in a well ventilated area.
(Catalytic mufflers need to warm up before they are
effective. Failure to do so may cause nausea or
carbon monoxide poisoning.)
WARNING: Keep hands and feet clear of rotating
pad! Inspect pad holders regularly. (A fractured pad
holder may result in pad holder fragments causing
injury.)
WARNING: Failure to follow the instructions and
warnings appearing in this operating manual or on
machine labels may result in serious injury to the
person using the machine and possibly to other
persons and property.
NOTE: This machine is manufactured for
commercial use only.
Propane powered floor burnishers are designed and
manufactured for ultra high speed commercial floor
burnishing only. These machines are designed to
burnish most modern types of floors including
composition tile, stone, marble, terrazzo, and resilient
floor covering using floor coatings designed for ultra
high speed burnishing.
Even though NFPA 58 8-4.5 says ...”these machines
shall be permitted to be used in buildings frequented
by the public, including the times when such buildings
are occupied by the public,” Amano Pioneer Eclipse
suggests usage when occupancy of a given work
area is minimal.
These machines should not be used:
z
in nursing homes, hospitals, day-care centers,
etc.
z
by unqualified or untrained personnel.
z
unless properly maintained and adjusted.
z
on areas with obstructions such as thresholds,
floor outlet boxes, etc.
z
in areas where loose tile or other objects are
present.
z
in rooms without proper ventilation.
These machines should not be left running
unattended.
CAUTION: Do not allow the burnisher to
operate without moving the machine. It may
burn the floor and damage the floor
covering.
Safe Operating Practices
PROPOSITION 65 WARNING
Battery posts, terminals, and related accessories
contain lead and lead compounds, chemicals
known to the State of California to cause cancer
and reproductive harm. Wash hands after handling.