Pioneer Eclipse CS2700R, Operator'S Manual

Page: 4 / 38

General Instructions
Proper use of the CleanStar 27R
As soon as the machine arrives, please inspect the exterior and all moving parts to verify that no damage
has occurred during transport. In case of missing or damaged parts, contact the Manufacturer or Authorized
Distributor immediately.
Use the scrubber to clean floors with any covering. Maximum performance can be achieved with proper use
and maintenance.
It is improper to use the CleanStar 27R scrubber:
• as a tractor to tow or push.
• on ramps with slopes higher than 5%.
• to transport people.
The machine has not been designed to work in environments in which explosive gases, powders or steams
can be generated.
Handling of Packed Machine
The machine is supplied packed on a pallet, closed in a box made of plywood or paperboard. Please see
the Features and Specifications section for information on weight and size. A black arrow on the box
indicates the barycenter position. The forks of the lift truck or of the transpallet should be placed so that the
black arrow indicated on the packing is about in the center of the forks. The palletized box should be
handled with extreme caution; avoid impacts or lifting it to extreme heights without reason.
Do not stack the boxes.
Unpacking the Machine
Unpack the machine with caution.
• Cut the straps with the proper cutting tool, being careful of
spring back.
• Remove the clips on the paperboard base which bind the
paperboard to the pallet by using a screwdriver or a proper
tool, and lift the paperboard.
• In case of package made of plywood, remove the clips on
the sides and on the base of each panel as well.
• Remove the other clips fastening the machine in the same
manner.
• Bring the machine to ground level by means of a metallic or
wooden ramp.
Handling of the Unpacked Machine
Check the unpacked machine and mount the batteries. If the machine must be handled for a short transport
after being used, detach the battery cables and remove brushes and squeegee. For a longer transport, it is
recommended to pack the machine again in its original box. The machine can be thrust-moved for short
distances.
3