7
En
English
Step 2 Connecting devices and this unit
Names of Parts
For details, see the “Operating Instructions” of this unit.
USB
terminal
MASTER
output
terminals
MIC
input terminal (1/4” TS jack)
*Supported unbalanced input only
MIC LEVEL
control *When not using a microphone, turn the volume to the minimum level.
TEMPO
slider
BEAT SYNC
button
CUE/LOOP CALL
button
OUT
(
OUT ADJUST
)
button
RELOOP/EXIT
button
IN/4BEAT
(
IN ADJUST
)
button
Jog wheel
Performance pad
SHIFT
button
HEADPHONES MIXING
control
CUE
button
HEADPHONES LEVEL
control
PLAY/PAUSE
f
button
LOAD
button
TRIM
control
Rotary selector
EQ
(
HI
/
MID
/
LOW
) controls
MASTER LEVEL
control
Headphones
CUE
button (
MASTER
)
BEAT
,
buttons
FILTER
control
BEAT FX SELECT
button
BEAT FX CH SELECT
switch
BEAT FX LEVEL/DEPTH
control
Headphones
CUE
button (
CH
)
BEAT FX ON/OFF
button
CHANNEL LEVEL
indicator
Crossfader
Channel fader
PHONES
output terminal
(3.5 mm stereo mini jack)
Pad mode select button
Deck 2
(right)
Deck 1
(left)
Connecting speakers with a built-in
amplifier to the unit with an audio
cable (RCA)
Connect speakers with built-in amplifier, etc. to the
[MASTER] output terminals of this unit.
•
An audio cable (RCA) is not included with this unit. Please provide it
yourself separately.
Speakers with built-in amplifier,
etc.
•
For details on connecting the input/output terminals, see the
“Operating Instructions” of this unit.
•
Turn the volume of the device(s) (speakers with built-in amplifier, etc.)
connected to the [
MASTER
] output terminals to an appropriate level.
Note that the output sound may be loud if the volume is set too high.
Connecting your PC/Mac to the unit
1 Connect your PC/Mac to the unit via a USB cable.
Make a direct connection with the supplied USB cable for optimum
performance. A USB hub cannot be used.
USB cable (supplied)
PC/Mac
2 Turn on your PC/Mac.
3 Turn on the device(s) (speakers with built-in
amplifier, etc.) connected to the output terminal.
