background image

Staff Duress Pendant (0510-0332-C) - User Guide

1

Preface

Introduction

This guide provides important information about the Staff Duress Pendant, a 
component of the Help Alert Emergency Call (E-Call) Solutions. It provides 
detailed instructions about using the pendant as well as specific requirements.

Help Alert E-Call Solution 

The Help Alert E-Call Solutions allow doctors, nurses and other staff members to 
discreetly send a distress call when assistance is needed. The Help Alert software is 
displayed on a monitor with the facility floor plan visible for accurate location 
notification. The Help Alert E-Call Solution enables hospitals to secure the entire 
facility (i.e. staff areas, departments, etc.) with a customized application based on 
the PinPoint Real Time Location System (RTLS) platform.

The Reference Tags form a peer-to-peer network and enables the Staff Duress 
Pendant to determine their exact location. The Help Alert E-Call Solution includes 
mobile access functions via a PDA. This component allows security personnel to receive 
visual and audible notifications and disable an alarm at the point of incident.

 

Intended Audience

The 

Staff Duress Pendant User Guide 

is intended for staff members who use the 

Pendant. It includes detailed information about using the Pendant, LED behavior 
and Pendant specifications.

WARNING: 

The Help Alert E-Call Solution is designed and 

intended to work in conjunction with a facility’s overall security 
program, including reasonable operating policies and procedures. The 
Help Alert E-Call Solution, by itself, cannot prevent security 
breaches.

Summary of Contents for Help Alert

















Reviews: