4
4.
Back Box Board Installation:
Locate the five-pin speaker connector shown by the
red arrow in the picture. Remove the speaker
connector by carefully rocking the connectors while
pulling it out.
Locate the two-pin cabinet speaker cable (Yellow
Arrow) and remove it.
Insert both speaker wires into the adapter board as
shown.
Plug
(Optional accessory)
Pinnovators 3.5 mm 12ft
cable from the subwoofer cable kit into the 3.5mm
green jack on the Back Box Board (BBB).
Connect the 3.5mm Interface cable into the RJ45
jack on the BBB adapter
Route the both cables through the black cable clamp
as shown.
Run the cables down through the bottom of the
back box and into the main cabinet.
