9
pinnacolopizzaovens.com
Install chimney cap (Part No. 8) to chimney (Part No. 7) and secure
using the 4pcs of 1/4” 10mm bolts.
Secure chimney assembly to the top of the cooking dome using
the 4pcs of 1/4” bolts (Part No. 36).
Secure outer chimney plate to the cooking dome using 4pcs of
1/4” 35mm bolts.
Secure the wooden handle to the door itself using the necessary in
the order as follows;
– Position 1 x 1/4” 15mm bolt through handle.
– Place an insulation mat (Part No. 15 or 16) behind the handle.
– Position the handle against the door with the nut through
the pre-drilled hole on the face of the door.
NOTE: the outside of door has the edge
surround towards the handle.
– Once the bolt is through the hole, position the second
insulation mat in the inside of the door.
– Apply the metal washer (Part No. 19) onto the bolt and secure
with the nut (Part No. 35).
- Once bolts are in position with nuts attached, tighten the nuts
using a 10mm wrench.
NOTE: The door itself may flex slightly. This
is inherent to the design of the door in order
to permit the stainless steel door to expand
and contract.
ASSEMBLY
STEP 3
STEP 4
