Pinnacle SHOWCENTER, User Manual

Page: 19 / 132

Set up Your ShowCenter System
15
1. Connecting the WLAN Antenna to the ShowCenter
Player
Firmly screw the WLAN antenna that came in the package into the connection
hole on the rear side of the ShowCenter Player. Make sure the antenna is in an
upright position.
2. Connecting the ShowCenter Player to the Television
SCART out / video and audio out
Europe: Connect the SCART cable included in the package to the SCART
output on the ShowCenter Player and to an available SCART input on your
television. If at all possible, select a SCART connection on your television that
supports RGB signals, since this will provide the best possible image quality.
Make sure to change the settings in the ShowCenter Player's Preferences menu
to SCART RGB.
U.S.: Connect the analog video output to an analog video input on your
television using the video cable (yellow plug) from the package. Next, connect
the "A" analog audio out jacks to the stereo audio in jacks on your television
using the stereo audio cable (red and white plugs) from the package.