should be connected to. To do this, click on the symbol in the task bar and
select the option
COM
: The dialog window "Remote Configuration" appears.
In this window, a maximum of four alternative ports are indicated. Serial
ports, which are already being used or are not present, are greyed out and are
not available for configuration.
Automatic serial port configuration
To automatically configure the serial port of your receiver, click on
Auto
Detection
: A test is performed to determine and display which port is being
used by the receiver.
If, after this test is performed, no serial port is found or displayed, check the
configuration of the serial ports in your system or perform a manual
configuration.
Manual serial port configuration
You can also manually configure the port.
To do this, click on the display of the serial port being used by the receiver.
Configuration Modification
In order to modify the configuration, you can bring up the "Remote
Configuration" window at any time while the program is active. To do this,
use the right mouse button to click on the symbol in the task bar and on the
option
COM
.
4
