PAGE 14
4.3 ASSEMBLING AND DISASSEMBLING
Assembling The Scooter
No tools are required to disassemble or assemble your scooter.
1. Place the freewheel mode lever in the drive position.
2. Set the rear section in the up position and make sure the hook for the front
section is connected to the axle of the rear section.
3. Put down the front and rear sections until the scooter is level.
4. Set down the battery pack on the scooter, and make sure it is in the correct
position.
5. Set down the seat on the seat post until the swivel lock engages and you hear a
click.
6.
Turn key switch to “ON”. Make sure battery gauge indicates sufficient power.
Disassembling The Scooter
4. OPERATION
Warning!
To avoid personal injury, ask for assistance, if necessary, while disassembling
or assembling your scooter.
Summary of Contents for MS01109
