Pinnacle Technology LS2CX, Operation Manual

Page: 30 / 48

26
8 SOME SIMPLE OPERATION
8.1 Copy price label
1. Call PLU or input unit price in normal state and print a piece of label.
2. Press “Copy” key and input a number between 1 and 9, then the corresponding number pieces of label is
printed.
3. Press Copy key and 0 key to print 1000 pieces of label continuously.
8.2 Print receipt
1. Reloaded the rolling paper and extend its head out of the outlet. Make sure not roll the paper head in the
rewinder. Please refer to Chapter 4.3.2 Receipt Paper Installation.
2. Use key [
→
] or [
←
] to select the paper type as ‘RECEIPT’.
3. Press Enter key to confirm.
Note:
If you want to use label paper again, you should enter this function to select the paper type as ‘LABEL’, and
after setting you must restart the scale by press the on-off on the scale’s bottom (switch to ‘RECEIPT’ no
need restart the scale).
8.3 Normal Package
This is suitable to quickly pack a same commodity (or different commodity with the same unit price) with
different weight. (The Package Type is set as ‘Normal’ on the scale software ‘PLU manager’.
1. Start up the function of “Auto” and “Price lock” (these two indicator light are lighting)
2. Select PLU or input the unit price.
3. Put the commodity (to be packed) on the pan and the label will be printed automatically.
Note: the operation of the
right is suggested if you
want to operate quickly.
1. Put commodity 1 on the pan
2. After the label is printed automatically put commodity 2 on the pan at the same
time, take away commodity 1.
3. Take away the label and stick it on commodity 1. The label of the commodity 2
will be printed out.
4. Put commodity 3 on the pan and take away commodity 2.
5. Take away the label and stick it on commodity 2, the next label will be printed.
6. Repeat as the above steps to overlap the time of waiting for printing label and
sticking label.
8.4 Edit Message
It’s to quickly edit message on the scale. Please follow steps below:
1.
Long press key “
→
0
←
” 2s, the LCD display “Edit Message”, press key “ENTER”.
2. The LCD display “? Index?”. Input digit 1~20000 to choose which line to input the message from line1 to
line 20000. E.g: To edit message 1, input digit ‘1’, and then press key “Print/ENTER”.
3. The LCD display “Line 1”, press key “Print/ENTER”.
4. The LCD display “? Message?”, input the message that shows on the 1
st
line of Message 1, and then press
key “Print/ENTER”.
5. The LCD display the next line. It supports to 8 lines of message.
6. After inputting 8 lines of message, the LCD will display ‘SAVE’. Press key “Print/ENTER” to save, or press
key “CL” to exit.
Note: Which editing, press key “CL” to exit if needed.