Pinnacle Technology LS2CX, Operation Manual

Page: 16 / 48

12
6. Close the side cover.
NOTE: If you use thermal paper instead of label, you should choose ‘RECEIPT’ in ‘System Set’. Please
refer to chapter 9.2 ‘System set’.
4.3.3 Linerless Paper Installation
Note: The linerless paper printing module is different from the receipt and label printing module. If customers
bought was the receipt or label printing module, but now want to replace it to the linerless paper module, please
contact the service department.
Please pre-set the related items when you print linerless paper.
1)
Press “System set” for seconds to enter the related setting, and then press key “ ” “
” till the LCD
display “Gap paper” and choose “Yes”, and then press the key “Print/Enter” to confirm.
2)
Press “System set” for seconds to enter the related setting, and then press key“ ” “
” till the LCD
display “paper type”, please choose “black label”, and then press the key “Print/Enter” to confirm.
1. Open the side cover and rotatable printing assembly.
2. Load the paper like the map shows (directly
lead the thermal paper to the paper outlet).